The Enistic Multi-Sensor is a three-in-one sensor featuring temperature measurement, light measurement and motion detection in one device. Designed for general office, residential and light industrial use, the multi-sensor can not only be used to log simple temperature, light and occupancy data but also as a feed into the Enistic Energy Manager analytics system, allowing analysis of air conditioning, heating and lighting performance. When combined with Enistic's occupancy analysis module, the multi-sensor can provide the information required to produce room occupancy usage analyses.

Electrical

• Power supply: 5V, 300mA, Regulated
• Power supply connection: 2.1mm, centre positive
• Power consumption (standby / typical / max): 0.000001 / 0.006 / 0.11 W
• Battery option: 3 x AA NiMH
• Expected battery life: 6 months-1 year (estimated)

Measurements and Detection

• Temperature range: -55 to +125 degrees celsius
• Nominal temperature accuracy: +/- 1 degree
• Extreme temperature accuracy (less than -40 or more than +85): +/- 2 degrees
• Light measurement range: 25-350 lux
• Light measurement accuracy: +/- 10 lux
• Motion detection range: 5m
• Motion detection angle (horizontal / vertical): 82 / 100 degrees
• Motion detection zones: 64
• Nominal reporting interval (temperature and light): 10 seconds
• Nominal reporting interval (motion): triggered on motion detection

Physical

• Size (l x w x h): 88 x 88 x 26 mm
• Fitting: 1 gang mounting box - 25, 35 or 47mm deep
• Weight: 370g

Fitting

• This unit should be fitted by qualified electricians only

Communication

• Standard: 802.15.4 / Zigbee Pro
• Does not interfere with WiFi networks
• Frequency: 2.4 GHz
• Maximum range between mesh nodes: 32m
• Maximum nodes per network: over 1,000,000
• Encryption: 128 bit AES secure encrypted communications

Miscellaneous and Standards

• Standards: CE, EMF, LVD, WEE, ROHS
• Country of design and manufacture: UK
• Packaging: cardboard box