BBS Professional Zone Controller (Cased)

Zone Controller (DIN Mountable)

Order code: BBSP-ZC/D

 

A wireless interface that talks to the Enistic products and sends the information via an Ethernet connection to the Enistic Energy Manager.

  • Acts as the interface between Enistic products an the Enistic software
  • Can handle up to 50 concurrent connections from Smart Sockets, Smart Meters, switches etc

 

 

 

  • Ultra long range (mesh networking gives full coverage of an office or home with one Zone Controller
  • Plug and play interface to the Enistic Energy Manager

The Enistic Zone Controller acts as master interface between the Enistic Energy Manager and other Enistic products. Simply plug the Zone Controller onto your internal network, i.e. into a data point, router or hub and this will act as a bridge between the Enistic system and the Enistic Energy Manager.

Because Enistic is a meshing system, every module talks to every other module in order to maximise range and reliability. This means that in any office or home environment, only one Zone Controller is required for full coverage so long as every module is within 30m of any other module. If the Zone Controller cannot directly pass messages to any module on the network, the other modules in the range will "pass on" the message to ensure 100% operation.

The Zone Controller send information to the Enistic Energy Manager via TCP/IP. As such, this controller can be mounted remotely reporting the information back to a centrally maintained server if required. This enables use in monitoring many installation using one central copy of the Energy Manager.

Specifications

  • Power indicator
  • RJ45 ethernet connector
  • 110 - 240VAC
  • Low power operation (5W)

Physical

  • Operating temperatures: -50 to +75 degrees C
  • Dimensions: 150 x 70 x 70 mm
  • Weight: 250g
  • Connections
    • Live
    • Neutral
    • Earth
    • RJ45 ethernet
  • Indicators
    • Network activity

Technical

  • 2.4GHz ISM Band digital direct sequence spread spectrum transceiver.
  • Hardware acceleration for IEEE802.15.4 operations.
  • Hardware supported encryption (AES-128)
  • Can be configured to act as a ZigBee coordinator, router or end device
  • Up to 4dBm output power
  • Sensitivity up to -98dBm (1% PER)

Software

  • DHCP required for network address allocation

Certifications

  • CE certified
  • Zigbee network compliant (closed network mode)
  • LVD certified
  • WEE certified