Measure energy consumed per staff member in real time and turn things on and off

Smart Socket (Inline)

Order code: BBSP-SS/I

 

 

A realtime Smart Meter and switch built into a wire-through casing

  • Designed to fit inline with existing wiring.  To fit, cut an existing wire and then wire both ends into this unit
  • Wireless operation with superb range
  • Simple to install, wire in and go
  • Provides a feedback every 10 seconds of the power being used, accurate to the nearest 0.1W
  • Includes a remotely controllable switch to turn the sockets on and off
  • Surge protected

 

 

 

 

Measure power in real time and turn things on and off remotely

  • Sends a real time reading of power consumed every 1 second to Enistic Energy Manager
  • To fit: cut an existing mains wire and then wire both ends into this unit
  • Flexible module for measuring and controlling individual appliances / circuits
  • Allows you to see energy consumed by any connected appliance / circuit
  • Remotely controllable by Enistic Energy Manager to allow it to switch on and off

The Smart Socket (inline) is an Appliance Level Smart Meter and Control System that is designed to be wired inline into an existing appliance. To fit it, cut the wire of the unit you want to control / monitor and then wire each end into this module so that this module sits in line (serial) with the appliance you want to manage. It is designed to be used as part of a Enistic system and is ideally suited for use within an office environment. This will send information to the Enistic Energy Manager about how much energy is being consuming every second so you can track how much is consuming every second / minute / day / month / year.

It features:

  • Report of the power being consumed to the nearest 0.1W every 1 second (or slower if so configured) to Enistic Energy Manager
  • Local control - simply press the red button to switch the unit on and off
  • Controllable (on and off) from the Energy Manager to automatically shut your devices down remotely
  • 13A maximum with surge protection
  • Encrypted communications for secure operation
  • Mesh networking for excellent range
  • Unique serial number embedded in each product for identification on network

Specifications

Switching & Electrical

  • 13A switching with relay operation
  • Locally switchable - press the "Program" button to switch on and off
  • Surge Protected
  • 110 - 240 VAC, 50 - 60 Hz
  • Standby power < 1W (typically 800mW)

Fitting

  • Connections:
    • On one end of the PCB inside this unit: Live in, Neutral in, Earth in
    • On the other end: Switched live out, Neutral out, Earth out
  • The holes in the plastic end cases should be drilled to the correct diameter.  The end pieces are soft plastic and will allow simple modification.
  • Cable stress relief connectors are fitted inside the unit.  These need to be placed around the incoming and outgoing cables and tightened.
  • This product needs to be fitted by a qualified electrician.

Power measurement

  • Reporting interval: 1 second (min) to 24 hour reporting.
  • Typical reporting interval: 10s
  • Electrical Meter grade power measurement to 0.1W accuracy

Physical

  • Size: 90 x 25 x 50 mm - 4 DIN
  • Weight: 220g

Communication

  • Zigbee communication with security code set for Enistic System integration only
  • Maximum number of products per installation: 2 billion
  • Mesh enabled with mesh repeating
  • Encryption: 128 AES secure encrypted communications
  • Auto discovery enabled

Standards

  • 2.4 GHz operation. Does not interfere with WiFi networks
  • Zigbee closed network operation enabled
  • BS5733 (plug)
  • CE certified
  • LVD certified
  • WEE compliant

Manufacture and design

  • Designed in the UK
  • Manufactured in the UK
  • UK, European and Worldwide Patents Pending